https://euroshop.kaceymusgraves.com/

https://savoybrasserie.com/

https://velogik-ateliers.com/

NANUK 930Matrice 200 Battery Case

With this version of the 930, DJI™ Matrice M200 series drone batteries are fully protected. The pre-cut foam fits up to eighteen (18) TB55 batteries or eighteen (18) TB50 batteries. Each of the eighteen cavities has a removable insert to accommodate the larger, TB55 batteries. In fact, the NANUK 930 Battery Case for DJI Matric M200 Series Drone can hold any combination of eighteen (18) TB50 or TB55 batteries.

Get a commercial quote
  • Interior dimensions (L x W x H): 457 mm x 330 mm x 175 mm
  • Exterior dimensions (L x W x H): 503 mm x 406 mm x 193 mm
  • Material: Lightweight NK-7 resin
  • Waterproof (IP67): Yes
  • Warranty: Conditional lifetime warranty
  • Airline check-in: Yes
  • Airline cabin carry-on: Yes
  • *Check with your airline carrier before travelling
  • Certification Lifetime Warranty
  • Certification Military Approved
  • Certification Waterproof IP67 Rated
  • Certification Impact Resistant
Interior dimensions (L x W x H) 457 mm x 330 mm x 175 mm
18.0″ x 13.0″ x 6.9″
Exterior dimensions (L x W x H) 503 mm x 406 mm x 193 mm
19.8″ x 16.0″ x 7.6″
Weight 8.35 lb | 3.79 kg
Lid depth 2.1″ | 53 mm
Base depth 4.8″ | 121 mm
Material Lightweight NK-7 resin
Internal volume 0.93 cu.ft (26.3 L)
Max buoyancy 65 lb | 29.5 kg
Temperature range Min -20°F (-29°C ) | Max 140°F (60°C)
Padlock Holes Diameter 0.300"
Water resistant (IP67) Yes
Warranty Conditional lifetime warranty
Airline check-in Yes
Airline cabin carry-on Yes
*Check with your airline carrier before travelling

No revisions on file.

Find a distributor
Contact Us